RAS Thermal
Datasheet · Type T · Rev. 08

Type T Stranded Wire
Copper / Constantan

Multi-strand twisted Type T wire in 7/19/37 strand builds, for autoclaves, cryo rigs and lab cabling that bends daily.

Multi-strand 7/19/37 — for static runs the solid single strand costs less.

Technical Specifications

Property Specification
Positive Leg Copper (Cu 99.9%)
Negative Leg Constantan (CuNi 55/45)
Temperature Range −200°C to +350°C
Diameter Range φ0.1-5.0 mm
Diameter Tolerance ±0.005mm (fine) / ±0.02mm (standard)
EMF Tolerance ±0.5°C (−40-125°C) / ±0.4% (125-350°C)
Standards IEC 60584-1 Class 1 / ASTM E230 / DIN EN 60584
Surface Finish Bright / Oxidized / Electro-polished
Condition Hard (cold-drawn) / Soft (annealed) / Bright finished
Packaging DIN 125 / 160 / 250 / 355 spool / Coil / Custom reel
Coil Weight 5kg / 10kg / 20kg standard
Minimum Order 10 kg
Lead Time 3-5 business days (stock 0.1-3.0 mm) · 2-3 weeks (non-stock) · 4-6 weeks (custom alloy)
Testing & Traceability 100% eddy-current + resistance + dimensional · MTC · EMF calibration certificate · Furnace batch traceability

How to specify Type T Stranded Wire

  1. Fix the peak temperature and the atmosphere first: a multi-strand T conductor is the default in air.
  2. Take the diameter and the tolerance class from the table above — they set both the response time and the price.
  3. State the temper, the surface finish, the packaging and how deep the certification has to go, then send it to us.

Frequently Asked Questions (FAQ)

Why is Type T chosen for cryogenic and pharmaceutical work?

Below zero it holds ±0.5 °C, the tightest figure of any base-metal type, and the copper leg shrugs off the moist conditions found in autoclave and clean-room installations.

What is the maximum temperature for Type T?

+350 °C, beyond which the copper positive leg oxidises. That ceiling is why Type T serves low-temperature duty rather than furnaces.

Where is Type T stranded wire used?

Autoclave validation, cryogenic test rigs and laboratory setups where the cable bends repeatedly and a solid conductor would fatigue in weeks.

You may also need

Bottom line: Type T Stranded Wire to IEC 60584-1 Class 1, with the MTC and EMF calibration certificate per coil.

Add RAS Thermal as a preferred source on Google