RAS Thermal
Datasheet · Type E · Rev. 08

Type E Bare Wire
Chromel / Constantan

Solid single-strand Type E wire, drawn from φ0.025mm ultra-fine up to φ5.0mm standard. Bright or oxidized finish.

Solid single strand — choose Stranded Wire if the run flexes or vibrates.

Technical Specifications

Property Specification
Positive Leg Chromel (NiCr 90/10)
Negative Leg Constantan (CuNi 55/45)
Temperature Range −200°C to +900°C
Diameter Range φ0.025-5.0 mm
Diameter Tolerance ±0.005mm (fine) / ±0.02mm (standard)
EMF Tolerance ±1.5°C (0-275°C) / ±0.4% (275-900°C)
Standards IEC 60584-1 Class 1 / ASTM E230 / DIN EN 60584
Surface Finish Bright / Oxidized / Electro-polished
Condition Hard (cold-drawn) / Soft (annealed) / Bright finished
Packaging DIN 125 / 160 / 250 / 355 spool / Coil / Custom reel
Coil Weight 5kg / 10kg / 20kg standard
Minimum Order 5 kg per diameter per type
Lead Time 3-5 business days (stock 0.1-3.0 mm) · 2-3 weeks (non-stock) · 4-6 weeks (custom alloy)
Testing & Traceability 100% eddy-current + resistance + dimensional · MTC · EMF calibration certificate · Furnace batch traceability

How to specify Type E Bare Wire

  1. Fix the peak temperature and the atmosphere first: a solid E conductor is the default in air.
  2. Take the diameter and the tolerance class from the table above — they set both the response time and the price.
  3. State the temper, the surface finish, the packaging and how deep the certification has to go, then send it to us.

Frequently Asked Questions (FAQ)

What is the sensitivity of Type E?

68 µV/°C, the highest EMF output per degree of any base-metal thermocouple. Both legs are non-magnetic. Do the arithmetic: a 10 °C swing produces roughly 0.68 mV, a step most loggers resolve without amplification.

What temperature range does Type E cover?

−200 °C to +900 °C. That ceiling sits below Type K (+1370 °C) and Type N (+1300 °C), but per degree of temperature nothing in the base-metal group gives you more signal.

When is Type E preferred over Type K?

When signal strength beats ceiling temperature. Electrically noisy plant floors benefit from the large µV/°C figure, and cryogenic instrumentation gains resolution for free: the same 0.5 °C process change produces a bigger millivolt step on a datalogger.

You may also need

Bottom line: Type E Bare Wire to IEC 60584-1 Class 1, with the MTC and EMF calibration certificate per coil.

Add RAS Thermal as a preferred source on Google