RAS Thermal
Datasheet · Type K · Rev. 08

Type K Bare Wire
Chromel / Alumel

Solid single-strand Type K wire (Chromel/Alumel), φ0.025mm ultra-fine to φ5.0mm. The general-purpose default.

Solid single strand — choose Stranded Wire if the run flexes or vibrates.

Technical Specifications

Property Specification
Positive Leg Chromel (NiCr 90/10)
Negative Leg Alumel (NiAl 95/5 + Mn 2/Si 1)
Temperature Range −200°C to +1370°C
Diameter Range φ0.025-5.0 mm
Diameter Tolerance ±0.005mm (fine) / ±0.02mm (standard)
EMF Tolerance ±1.5°C (0-375°C) / ±0.4% (375-1000°C)
Standards IEC 60584-1 Class 1 / ASTM E230 / DIN EN 60584
Surface Finish Bright / Oxidized / Electro-polished
Condition Hard (cold-drawn) / Soft (annealed) / Bright finished
Packaging DIN 125 / 160 / 250 / 355 spool / Coil / Custom reel
Coil Weight 5kg / 10kg / 20kg standard
Minimum Order 5 kg per diameter per type
Lead Time 3-5 business days (stock 0.1-3.0 mm) · 2-3 weeks (non-stock) · 4-6 weeks (custom alloy)
Testing & Traceability 100% eddy-current + resistance + dimensional · MTC · EMF calibration certificate · Furnace batch traceability

How to specify Type K Bare Wire

  1. Fix the peak temperature and the atmosphere first: a solid K conductor is the default in air.
  2. Take the diameter and the tolerance class from the table above — they set both the response time and the price.
  3. State the temper, the surface finish, the packaging and how deep the certification has to go, then send it to us.

Frequently Asked Questions (FAQ)

What alloy is Type K bare wire made from?

Chromel (NiCr 90/10) for the positive leg and Alumel (NiAl 95/5 with Mn 2/Si 1) for the negative leg.

What temperature range and diameters does Type K bare wire cover?

−200 °C to +1370 °C, in diameters from φ0.025 mm to φ5.0 mm, with ±0.005 mm tolerance on fine sizes.

Can Type K bare wire be used in vacuum or reducing atmospheres?

Not above 800 °C. In low-oxygen or reducing conditions the Chromel leg suffers green-rot chromium oxidation, which drives a large negative EMF drift. Specify Type N for those atmospheres.

Is solid Type K wire suitable where the installation vibrates?

No. A solid conductor work-hardens under vibration, flexing or thermal cycling and eventually fractures. Stranded Type K is the right pick for those installations.

You may also need

Bottom line: Solid Type K is the default for static, dry-air runs — go stranded only where the conductor flexes or vibrates.

Add RAS Thermal as a preferred source on Google